A journal of IEEE and CAA , publishes high-quality papers in English on original theoretical/experimental research and development in all areas of automation
Advanced Search

IEEE/CAA Journal of Automatica Sinica

  • JCR Impact Factor: 15.3, Top 1 (SCI Q1)
    CiteScore: 23.5, Top 2% (Q1)
    Google Scholar h5-index: 77， TOP 5
Turn off MathJax
Article Contents
Article Navigation >  IEEE/CAA Journal of Automatica Sinica  > 2025  > In Press, Accepted Manuscript
Y. Chen, D. Zhang, R. Yan, and M. Xie, “Applications of domain generalization to machine fault diagnosis: A survey,” IEEE/CAA J. Autom. Sinica, 2025. doi: 10.1109/JAS.2025.125120
Citation: Y. Chen, D. Zhang, R. Yan, and M. Xie, “Applications of domain generalization to machine fault diagnosis: A survey,” IEEE/CAA J. Autom. Sinica, 2025. doi: 10.1109/JAS.2025.125120
shu

Applications of Domain Generalization to Machine Fault Diagnosis: A Survey

doi: 10.1109/JAS.2025.125120
Funds:  This work was partially supported by the National Natural Science Foundation of China (62322315, 61873237), the Zhejiang Provincial Natural Science Foundation of China (LR22F030003). This work was also supported by Research Grant Council of Hong Kong (11201023, 11202224) and Hong Kong Innovation and Technology Commission (InnoHK Project CIMDA)
More Information
    Abstract
  • In actual industrial scenarios, the variation of operating conditions, the existence of data noise, and failure of measurement equipment will inevitably affect the distribution of perceptive data. Deep learning-based fault diagnosis algorithms strongly rely on the assumption that source and target data are independent and identically distributed, and the learned diagnosis knowledge is difficult to generalize to out-of-distribution data. Domain generalization (DG) aims to achieve the generalization of arbitrary target domain data by using only limited source domain data for diagnosis model training. The research of DG for fault diagnosis has made remarkable progress in recent years and lots of achievements have been obtained. In this article, for the first time a comprehensive literature review on DG for fault diagnosis from a learning mechanism-oriented perspective is provided to summarize the development in recent years. Specifically, we first conduct a comprehensive review on existing methods based on the similarity of basic principles and design motivations. Then, the recent trend of DG for fault diagnosis is also analyzed. Finally, the existing problems and future prospect is performed.

     

    • FullText(HTML)
  • loading
    • References(137)
  • [1]
    S. Nandi, H. Toliyat, and X. Li, “Condition monitoring and fault diagnosis of electrical motors-a review,” IEEE Transactions on Energy Conversion, vol. 20, no. 4, pp. 719–729, 2005. doi: 10.1109/TEC.2005.847955
    [2]
    Z. Gao, C. Cecati, and S. X. Ding, “A survey of fault diagnosis and fault-tolerant techniques-part i: Fault diagnosis with model-based and signal-based approaches,” IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3757–3767, 2015. doi: 10.1109/TIE.2015.2417501
    [3]
    J. Ren, J. Wen, Z. Zhao, R. Yan, X. Chen, and A. K. Nandi, “Uncertainty-aware deep learning: A promising tool for trustworthy fault diagnosis,” IEEE/CAA Journal of Automatica Sinica, vol. 11, no. 6, pp. 1317–1330, 2024. doi: 10.1109/JAS.2024.124290
    [4]
    Y. Lei, B. Yang, X. Jiang, F. Jia, N. Li, and A. K. Nandi, “Applications of machine learning to machine fault diagnosis: A review and roadmap,” Mechanical Systems and Signal Processing, vol. 138, p. 106587, 2020. doi: 10.1016/j.ymssp.2019.106587
    [5]
    J. Huang, Z. Li, and Z. Zhou, “A simple framework to generalized zero-shot learning for fault diagnosis of industrial processes,” IEEE/CAA Journal of Automatica Sinica, vol. 10, no. 6, pp. 1504–1506, 2023. doi: 10.1109/JAS.2023.123426
    [6]
    A. White, A. Karimoddini, and M. Karimadini, “Resilient fault diagnosis under imperfect observations - a need for industry 4.0 era,” IEEE/CAA Journal of Automatica Sinica, vol. 7, no. 5, pp. 1279–1288, 2020. doi: 10.1109/JAS.2020.1003333
    [7]
    A. Glowacz, R. Tadeusiewicz, S. Legutko, W. Caesarendra, M. Irfan, H. Liu, F. Brumercik, M. Gutten, M. Sulowicz, J. A. {Antonino Daviu}, T. Sarkodie-Gyan, P. Fracz, A. Kumar, and J. Xiang, “Fault diagnosis of angle grinders and electric impact drills using acoustic signals,” Applied Acoustics, vol. 179, p. 108070, 2021. doi: 10.1016/j.apacoust.2021.108070
    [8]
    W. Li, H. Lan, J. Chen, K. Feng, and R. Huang, “Wavcapsnet: An interpretable intelligent compound fault diagnosis method by backward tracking,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–11, 2023.
    [9]
    B. Yang, Y. Lei, X. Li, N. Li, and A. K. Nandi, “Label recovery and trajectory designable network for transfer fault diagnosis of machines with incorrect annotation,” IEEE/CAA Journal of Automatica Sinica, vol. 11, no. 4, pp. 932–945, 2024. doi: 10.1109/JAS.2023.124083
    [10]
    H. Wang, J. Xu, R. Yan, and R. X. Gao, “A new intelligent bearing fault diagnosis method using sdp representation and se-cnn,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 5, pp. 2377–2389, 2020. doi: 10.1109/TIM.2019.2956332
    [11]
    G. Li, J. Wu, C. Deng, Z. Chen, and X. Shao, “Convolutional neural network-based bayesian gaussian mixture for intelligent fault diagnosis of rotating machinery,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–10, 2021.
    [12]
    D. Zhang, Y. Chen, F. Guo, H. R. Karimi, H. Dong, and Q. Xuan, “A new interpretable learning method for fault diagnosis of rolling bearings,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–10, 2021.
    [13]
    J. Cheng, Y. Yang, N. Hu, Z. Cheng, and J. Cheng, “A noise reduction method based on adaptive weighted symplectic geometry decomposition and its application in early gear fault diagnosis,” Mechanical Systems and Signal Processing, vol. 149, p. 107351, 2021. doi: 10.1016/j.ymssp.2020.107351
    [14]
    G. Dong and J. Chen, “Noise resistant time frequency analysis and application in fault diagnosis of rolling element bearings,” Mechanical Systems and Signal Processing, vol. 33, pp. 212–236, 2012. doi: 10.1016/j.ymssp.2012.06.008
    [15]
    Z. Mo, J. Wang, H. Zhang, and Q. Miao, “Weighted cyclic harmonic-to-noise ratio for rolling element bearing fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 2, pp. 432–442, 2020. doi: 10.1109/TIM.2019.2903615
    [16]
    M. Wang, M. Xie, Y. Wang, and M. Chen, “A deep quality monitoring network for quality-related incipient faults,” IEEE Transactions on Neural Networks and Learning Systems, pp. 1–11, 2023.
    [17]
    M. He and D. He, “Deep learning based approach for bearing fault diagnosis,” IEEE Transactions on Industry Applications, vol. 53, no. 3, pp. 3057–3065, 2017. doi: 10.1109/TIA.2017.2661250
    [18]
    L. Wen, X. Li, L. Gao, and Y. Zhang, “A new convolutional neural network-based data-driven fault diagnosis method,” IEEE Transactions on Industrial Electronics, vol. 65, no. 7, pp. 5990–5998, 2018. doi: 10.1109/TIE.2017.2774777
    [19]
    A. Glowacz, “Ventilation diagnosis of minigrinders using thermal images,” Expert Systems with Applications, vol. 237, p. 121435, 2024. doi: 10.1016/j.eswa.2023.121435
    [20]
    T. Sorsa, H. Koivo, and H. Koivisto, “Neural networks in process fault diagnosis,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 21, no. 4, pp. 815–825, 1991. doi: 10.1109/21.108299
    [21]
    Y. Chen, D. Zhang, H. Ni, J. Cheng, and H. R. Karimi, “Multi-scale split dual calibration network with periodic information for interpretable fault diagnosis of rotating machinery,” Engineering Applications of Artificial Intelligence, vol. 123, p. 106181, 2023. doi: 10.1016/j.engappai.2023.106181
    [22]
    X. Xu, D. Cao, Y. Zhou, and J. Gao, “Application of neural network algorithm in fault diagnosis of mechanical intelligence,” Mechanical Systems and Signal Processing, vol. 141, p. 106625, 2020. doi: 10.1016/j.ymssp.2020.106625
    [23]
    J. Wang, L. Qiao, Y. Ye, and Y. Chen, “Fractional envelope analysis for rolling element bearing weak fault feature extraction,” IEEE/CAA Journal of Automatica Sinica, vol. 4, no. 2, pp. 353–360, 2017. doi: 10.1109/JAS.2016.7510166
    [24]
    Z. Wang, Z. Wu, X. Li, H. Shao, T. Han, and M. Xie, “Attention-aware temporal-spatial graph neural network with multi-sensor information fusion for fault diagnosis,” Knowledge-Based Systems, vol. 278, p. 110891, 2023. doi: 10.1016/j.knosys.2023.110891
    [25]
    W. Yu, C. Zhao, B. Huang, and M. Xie, “An unsupervised fault detection and diagnosis with distribution dissimilarity and lasso penalty,” IEEE Transactions on Control Systems Technology, vol. 32, no. 3, pp. 767–779, 2024. doi: 10.1109/TCST.2023.3330443
    [26]
    Y. Lei, J. Lin, Z. He, and M. J. Zuo, “A review on empirical mode decomposition in fault diagnosis of rotating machinery,” Mechanical Systems and Signal Processing, vol. 35, no. 1, pp. 108–126, 2013.
    [27]
    T. Han, C. Liu, W. Yang, and D. Jiang, “A novel adversarial learning framework in deep convolutional neural network for intelligent diagnosis of mechanical faults,” Knowledge-Based Systems, vol. 165, pp. 474–487, 2019. doi: 10.1016/j.knosys.2018.12.019
    [28]
    R. Wang, Z. Chen, and W. Li, “Gradient flow-based meta generative adversarial network for data augmentation in fault diagnosis,” Applied Soft Computing, vol. 142, p. 110313, 2023. doi: 10.1016/j.asoc.2023.110313
    [29]
    R. Liu, B. Yang, E. Zio, and X. Chen, “Artificial intelligence for fault diagnosis of rotating machinery: A review,” Mechanical Systems and Signal Processing, vol. 108, pp. 33–47, 2018. doi: 10.1016/j.ymssp.2018.02.016
    [30]
    R. Yan, Z. Shang, H. Xu, J. Wen, Z. Zhao, X. Chen, and R. X. Gao, “Wavelet transform for rotary machine fault diagnosis: 10 years revisited,” Mechanical Systems and Signal Processing, vol. 200, p. 110545, 2023. doi: 10.1016/j.ymssp.2023.110545
    [31]
    T. Li, Z. Zhao, C. Sun, L. Cheng, X. Chen, R. Yan, and R. X. Gao, “Waveletkernelnet: An interpretable deep neural network for industrial intelligent diagnosis,” IEEE Transactions on Systems, Man, and Cybernetics: Systems, vol. 52, no. 4, pp. 2302–2312, 2022. doi: 10.1109/TSMC.2020.3048950
    [32]
    K. Zhou, C. Yang, J. Liu, and Q. Xu, “Dynamic graph-based feature learning with few edges considering noisy samples for rotating machinery fault diagnosis,” IEEE Transactions on Industrial Electronics, vol. 69, no. 10, p. 10, 2022.
    [33]
    Y. Chen, D. Zhang, H. Zhang, and Q.-G. Wang, “Dual-path mixed-domain residual threshold networks for bearing fault diagnosis,” IEEE Transactions on Industrial Electronics, vol. 69, no. 12, p. 13, 2022.
    [34]
    Y. Song, Y. Li, L. Jia, and M. Qiu, “Retraining strategy-based domain adaption network for intelligent fault diagnosis,” IEEE Transactions on Industrial Informatics, vol. 16, no. 9, pp. 6163–6171, 2020. doi: 10.1109/TII.2019.2950667
    [35]
    Y. Chen, D. Zhang, and R. Yan, “Domain adaptation networks with parameter-free adaptively rectified linear units for fault diagnosis under variable operating conditions,” IEEE Transactions on Neural Networks and Learning Systems, pp. 1–14, 2023.
    [36]
    Y. Li, Y. Ren, H. Zheng, Z. Deng, and S. Wang, “A novel cross-domain intelligent fault diagnosis method based on entropy features and transfer learning,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–14, 2021.
    [37]
    X. Yu, Z. Zhao, X. Zhang, C. Sun, B. Gong, R. Yan, and X. Chen, “Conditional adversarial domain adaptation with discrimination embedding for locomotive fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–12, 2021.
    [38]
    Z. Zhao, Q. Zhang, X. Yu, C. Sun, S. Wang, R. Yan, and X. Chen, “Applications of unsupervised deep transfer learning to intelligent fault diagnosis: A survey and comparative study,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–28, 2021.
    [39]
    X. Chen, R. Yang, Y. Xue, M. Huang, R. Ferrero, and Z. Wang, “Deep transfer learning for bearing fault diagnosis: A systematic review since 2016,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–21, 2023.
    [40]
    X. Chen, X. Li, S. Yu, Y. Lei, N. Li, and B. Yang, “Dynamic vision enabled contactless cross-domain machine fault diagnosis with neuromorphic computing,” IEEE/CAA Journal of Automatica Sinica, vol. 11, no. 3, pp. 788–790, 2024. doi: 10.1109/JAS.2023.124107
    [41]
    X. Chen, H. Shao, Y. Xiao, S. Yan, B. Cai, and B. Liu, “Collaborative fault diagnosis of rotating machinery via dual adversarial guided unsupervised multi-domain adaptation network,” Mechanical Systems and Signal Processing, vol. 198, p. 110427, 2023. doi: 10.1016/j.ymssp.2023.110427
    [42]
    Z. Zhao, Q. Zhang, X. Yu, C. Sun, S. Wang, R. Yan, and X. Chen, “Applications of unsupervised deep transfer learning to intelligent fault diagnosis: A survey and comparative study,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–28, 2021.
    [43]
    Y. An, K. Zhang, Y. Chai, Q. Liu, and X. Huang, “Domain adaptation network base on contrastive learning for bearings fault diagnosis under variable working conditions,” Expert Systems with Applications, vol. 212, p. 118802, 2023. doi: 10.1016/j.eswa.2022.118802
    [44]
    Z. Zhu, G. Chen, and G. Tang, “Domain adaptation with multi-adversarial learning for open-set cross-domain intelligent bearing fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–11, 2023.
    [45]
    X. Yang, X. Yuan, T. Ye, W. Zhu, F. Zhou, and J. Jin, “Psnn-tada: Prototype and stochastic neural network-based twice adversarial domain adaptation for fault diagnosis under varying working conditions,” IEEE Transactions on Instrumentation and Measurement, vol. 73, pp. 1–12, 2024.
    [46]
    K. Sun, X. Xu, N. Lu, H. Xia, and M. Han, “Joint discriminative adversarial domain adaptation for cross-domain fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–11, 2023.
    [47]
    K. Zhao, Z. Liu, B. Zhao, and H. Shao, “Class-aware adversarial multiwavelet convolutional neural network for cross-domain fault diagnosis,” IEEE Transactions on Industrial Informatics, vol. 20, no. 3, pp. 4492–4503, 2024. doi: 10.1109/TII.2023.3316264
    [48]
    C. Wang, Z. Wang, L. Ma, H. Dong, and W. Sheng, “Subdomain-alignment data augmentation for pipeline fault diagnosis: An adversarial self-attention network,” IEEE Transactions on Industrial Informatics, vol. 20, no. 2, pp. 1374–1384, 2024. doi: 10.1109/TII.2023.3275701
    [49]
    X. Li, X.-D. Jia, W. Zhang, H. Ma, Z. Luo, and X. Li, “Intelligent cross-machine fault diagnosis approach with deep auto-encoder and domain adaptation,” Neurocomputing, vol. 383, pp. 235–247, 2020. doi: 10.1016/j.neucom.2019.12.033
    [50]
    Y. Chen, D. Zhang, K. Zhu, and R. Yan, “An adaptive activation transfer learning approach for fault diagnosis,” IEEE/ASME Transactions on Mechatronics, vol. 28, no. 5, pp. 2645–2656, 2023. doi: 10.1109/TMECH.2023.3243533
    [51]
    L. Guo, Y. Yu, Y. Liu, H. Gao, and T. Chen, “Reconstruction domain adaptation transfer network for partial transfer learning of machinery fault diagnostics,” IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1–10, 2022.
    [52]
    J. Chen, J. Wang, J. Zhu, T. H. Lee, and C. W. de Silva, “Unsupervised cross-domain fault diagnosis using feature representation alignment networks for rotating machinery,” IEEE/ASME Transactions on Mechatronics, vol. 26, no. 5, pp. 2770–2781, 2021. doi: 10.1109/TMECH.2020.3046277
    [53]
    Z. Chen, G. He, J. Li, Y. Liao, K. Gryllias, and W. Li, “Domain adversarial transfer network for cross-domain fault diagnosis of rotary machinery,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 11, pp. 8702–8712, 2020. doi: 10.1109/TIM.2020.2995441
    [54]
    Z.-H. Liu, B.-L. Lu, H.-L. Wei, L. Chen, X.-H. Li, and M. R{ä}tsch, “Deep adversarial domain adaptation model for bearing fault diagnosis,” IEEE Transactions on Systems, Man, and Cybernetics: Systems, vol. 51, no. 7, pp. 4217–4226, 2021. doi: 10.1109/TSMC.2019.2932000
    [55]
    Y. Wang, X. Sun, J. Li, and Y. Yang, “Intelligent fault diagnosis with deep adversarial domain adaptation,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–9, 2021.
    [56]
    Z. Chai and C. Zhao, “A fine-grained adversarial network method for cross-domain industrial fault diagnosis,” IEEE Transactions on Automation Science and Engineering, vol. 17, no. 3, pp. 1432–1442, 2020. doi: 10.1109/TASE.2019.2957232
    [57]
    Z. Wang, X. He, B. Yang, and N. Li, “Subdomain adaptation transfer learning network for fault diagnosis of roller bearings,” IEEE Transactions on Industrial Electronics, vol. 69, no. 8, pp. 8430–8439, 2022. doi: 10.1109/TIE.2021.3108726
    [58]
    “Residual joint adaptation adversarial network for intelligent transfer fault diagnosis,” Mechanical Systems and Signal Processing, vol. 145, p. 106962, 2020.
    [59]
    S. Li and J. Yu, “Deep transfer network with adaptive joint distribution adaptation: A new process fault diagnosis model,” IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1–13, 2022.
    [60]
    Y. Xiao, H. Shao, S. Han, Z. Huo, and J. Wan, “Novel joint transfer network for unsupervised bearing fault diagnosis from simulation domain to experimental domain,” IEEE/ASME Transactions on Mechatronics, vol. 27, no. 6, pp. 5254–5263, 2022. doi: 10.1109/TMECH.2022.3177174
    [61]
    Y. Zhang, K. Yu, Z. Ren, and S. Zhou, “Joint domain alignment and class alignment method for cross-domain fault diagnosis of rotating machinery,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–12, 2021.
    [62]
    H. Ren, J. Wang, J. Dai, Z. Zhu, and J. Liu, “Dynamic balanced domain-adversarial networks for cross-domain fault diagnosis of train bearings,” IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1–12, 2022.
    [63]
    Y. Li, Y. Dong, M. Xu, P. Liu, and R. Wang, “Instance weighting-based partial domain adaptation for intelligent fault diagnosis of rotating machinery,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–14, 2023.
    [64]
    W. Zhang, X. Li, H. Ma, Z. Luo, and X. Li, “Open-set domain adaptation in machinery fault diagnostics using instance-level weighted adversarial learning,” IEEE Transactions on Industrial Informatics, vol. 17, no. 11, pp. 7445–7455, 2021. doi: 10.1109/TII.2021.3054651
    [65]
    J. Tian, D. Han, H. R. Karimi, Y. Zhang, and P. Shi, “A universal multi-source domain adaptation method with unsupervised clustering for mechanical fault diagnosis under incomplete data,” Neural Networks, vol. 173, p. 106167, 2024. doi: 10.1016/j.neunet.2024.106167
    [66]
    B. Wang, L. Wen, X. Li, and L. Gao, “Adaptive class center generalization network: A sparse domain-regressive framework for bearing fault diagnosis under unknown working conditions,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–11, 2023.
    [67]
    S. Asutkar, C. Chalke, K. Shivgan, and S. Tallur, “Tinyml-enabled edge implementation of transfer learning framework for domain generalization in machine fault diagnosis,” Expert Systems with Applications, vol. 213, p. 119016, 2023. doi: 10.1016/j.eswa.2022.119016
    [68]
    H. Zheng, R. Wang, Y. Yang, Y. Li, and M. Xu, “Intelligent fault identification based on multisource domain generalization towards actual diagnosis scenario,” IEEE Transactions on Industrial Electronics, vol. 67, no. 2, pp. 1293–1304, 2020. doi: 10.1109/TIE.2019.2898619
    [69]
    C. Zhao, E. Zio, and W. Shen, “Domain generalization for cross-domain fault diagnosis: An application-oriented perspective and a benchmark study,” Reliability Engineering & System Safety, vol. 245, p. 109964, 2024.
    [70]
    C. Wang, Z. Wang, Q. Liu, H. Dong, and W. Sheng, “Support-sample-assisted domain generalization via attacks and defenses: Concepts, algorithms, and applications to pipeline fault diagnosis,” IEEE Transactions on Industrial Informatics, pp. 1–11, 2024.
    [71]
    C. Liu, X. Ma, T. Han, X. Shi, C. Qin, and S. Hu, “Ntscatnet: An interpretable convolutional neural network for domain generalization diagnosis across different transmission paths,” Measurement, vol. 204, p. 112041, 2022. doi: 10.1016/j.measurement.2022.112041
    [72]
    Z. Mo, Z. Zhang, Q. Miao, and K.-L. Tsui, “Sparsity-constrained invariant risk minimization for domain generalization with application to machinery fault diagnosis modeling,” IEEE Transactions on Cybernetics, vol. 54, no. 3, pp. 1547–1559, 2024. doi: 10.1109/TCYB.2022.3223783
    [73]
    Z. Mo, Z. Zhang, and K.-L. Tsui, “Distance aware risk minimization for domain generalization in machine fault diagnosis,” IEEE Internet of Things Journal, pp. 1–1, 2024. doi: 10.1109/JIOT.2024.3441253
    [74]
    M. Zhang, C. Huang, C. He, and J. Yang, “An end-to-end domain generalization fault diagnosis method based on adaptive weighted domain adversarial learning,” Journal of Physics: Conference Series, vol. 2694, no. 1, p. 012042, jan 2024. doi: 10.1088/1742-6596/2694/1/012042
    [75]
    I. Goodfellow, J. Pouget-Abadie, M. Mirza, B. Xu, D. Warde-Farley, S. Ozair, A. Courville, and Y. Bengio, “Generative adversarial nets,” in Advances in Neural Information Processing Systems, Z. Ghahramani, M. Welling, C. Cortes, N. Lawrence, and K. Weinberger, Eds., vol. 27. Curran Associates, Inc., 2014.
    [76]
    R. Wang, W. Huang, M. Shi, J. Wang, C. Shen, and Z. Zhu, “Federated adversarial domain generalization network: A novel machinery fault diagnosis method with data privacy,” Knowledge-Based Systems, vol. 256, p. 109880, 2022. doi: 10.1016/j.knosys.2022.109880
    [77]
    X. Miao, H. Zhao, B. Gao, and F. Song, “Corrosion leakage risk diagnosis of oil and gas pipelines based on semi-supervised domain generalization model,” Reliability Engineering & System Safety, vol. 238, p. 109486, 2023.
    [78]
    Q. Li, C. Shen, L. Chen, and Z. Zhu, “Knowledge mapping-based adversarial domain adaptation: A novel fault diagnosis method with high generalizability under variable working conditions,” Mechanical Systems and Signal Processing, vol. 147, p. 107095, 2021. doi: 10.1016/j.ymssp.2020.107095
    [79]
    Q. Zhang, Z. Zhao, X. Zhang, Y. Liu, C. Sun, M. Li, S. Wang, and X. Chen, “Conditional adversarial domain generalization with a single discriminator for bearing fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–15, 2021.
    [80]
    Q. Qian, J. Zhou, and Y. Qin, “Relationship transfer domain generalization network for rotating machinery fault diagnosis under different working conditions,” IEEE Transactions on Industrial Informatics, vol. 19, no. 9, pp. 9898–9908, 2023. doi: 10.1109/TII.2022.3232842
    [81]
    R. Huang, J. Li, Y. Liao, J. Chen, Z. Wang, and W. Li, “Deep adversarial capsule network for compound fault diagnosis of machinery toward multidomain generalization task,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–11, 2021.
    [82]
    X. Li, W. Zhang, H. Ma, Z. Luo, and X. Li, “Domain generalization in rotating machinery fault diagnostics using deep neural networks,” Neurocomputing, vol. 403, pp. 409–420, 2020. doi: 10.1016/j.neucom.2020.05.014
    [83]
    T. Han, Y.-F. Li, and M. Qian, “A hybrid generalization network for intelligent fault diagnosis of rotating machinery under unseen working conditions,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–11, 2021.
    [84]
    Q. Qian, J. Luo, and Y. Qin, “Adaptive intermediate class-wise distribution alignment: A universal domain adaptation and generalization method for machine fault diagnosis,” IEEE Transactions on Neural Networks and Learning Systems, pp. 1–15, 2024. doi: 10.1109/TNNLS.2024.3376449
    [85]
    H. Zhang, M. Cisse, Y. N. Dauphin, and D. Lopez-Paz, “mixup: Beyond empirical risk minimization,” arXiv preprint arXiv: 1710.09412, 2018.
    [86]
    Q. Li, L. Chen, L. Kong, D. Wang, M. Xia, and C. Shen, “Cross-domain augmentation diagnosis: An adversarial domain-augmented generalization method for fault diagnosis under unseen working conditions,” Reliability Engineering & System Safety, vol. 234, p. 109171, 2023.
    [87]
    Y. Shi, A. Deng, M. Deng, M. Xu, Y. Liu, X. Ding, and W. Bian, “Domain augmentation generalization network for real-time fault diagnosis under unseen working conditions,” Reliability Engineering & System Safety, vol. 235, p. 109188, 2023.
    [88]
    X. Wang, C. Wang, H. Liu, C. Zhang, Z. Fu, L. Ding, C. Bai, H. Zhang, and Y. Wei, “An adversarial single-domain generalization network for fault diagnosis of wind turbine gearboxes,” Journal of Marine Science and Engineering, vol. 11, no. 12, p. 2384, 2023. doi: 10.3390/jmse11122384
    [89]
    C. Zhao and W. Shen, “Adversarial mutual information-guided single domain generalization network for intelligent fault diagnosis,” IEEE Transactions on Industrial Informatics, vol. 19, no. 3, pp. 2909–2918, 2023. doi: 10.1109/TII.2022.3175018
    [90]
    C. Zhao and W. Shen, “A federated distillation domain generalization framework for machinery fault diagnosis with data privacy,” Engineering Applications of Artificial Intelligence, vol. 130, p. 107765, 2024. doi: 10.1016/j.engappai.2023.107765
    [91]
    L. Chen, Q. Li, C. Shen, J. Zhu, D. Wang, and M. Xia, “Adversarial domain-invariant generalization: A generic domain-regressive framework for bearing fault diagnosis under unseen conditions,” IEEE Transactions on Industrial Informatics, vol. 18, no. 3, pp. 1790–1800, 2022. doi: 10.1109/TII.2021.3078712
    [92]
    X. Huang and S. Belongie, “Arbitrary style transfer in real-time with adaptive instance normalization,” Proceedings of the IEEE International Conference on Computer Vision (ICCV), Oct 2017.
    [93]
    J. Wang, H. Ren, C. Shen, W. Huang, and Z. Zhu, “Multi-scale style generative and adversarial contrastive networks for single domain generalization fault diagnosis,” Reliability Engineering & System Safety, vol. 243, p. 109879, 2024.
    [94]
    R. Wang, W. Huang, Y. Lu, X. Zhang, J. Wang, C. Ding, and C. Shen, “A novel domain generalization network with multidomain specific auxiliary classifiers for machinery fault diagnosis under unseen working conditions,” Reliability Engineering & System Safety, vol. 238, p. 109463, 2023.
    [95]
    H. Huang, R. Wang, K. Zhou, L. Ning, and K. Song, “Causalvit: Domain generalization for chemical engineering process fault detection and diagnosis,” Process Safety and Environmental Protection, vol. 176, pp. 155–165, 2023. doi: 10.1016/j.psep.2023.06.018
    [96]
    Y. Liao, R. Huang, J. Li, Z. Chen, and W. Li, “Deep semisupervised domain generalization network for rotary machinery fault diagnosis under variable speed,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 10, pp. 8064–8075, 2020.
    [97]
    X. Cong, Y. Song, Y. Li, and L. Jia, “Federated domain generalization with global robust model aggregation strategy for bearing fault diagnosis,” Measurement Science and Technology, vol. 34, no. 11, p. 115116, aug 2023. doi: 10.1088/1361-6501/ace841
    [98]
    C. Zhao and W. Shen, “Adaptive open set domain generalization network: Learning to diagnose unknown faults under unknown working conditions,” Reliability Engineering & System Safety, vol. 226, p. 108672, 2022.
    [99]
    Y. Li, Y. Song, L. Jia, S. Gao, Q. Li, and M. Qiu, “Intelligent fault diagnosis by fusing domain adversarial training and maximum mean discrepancy via ensemble learning,” IEEE Transactions on Industrial Informatics, vol. 17, no. 4, pp. 2833–2841, 2021. doi: 10.1109/TII.2020.3008010
    [100]
    Q. Qian, Y. Qin, J. Luo, and S. Wang, “Partial transfer fault diagnosis by multiscale weight-selection adversarial network,” IEEE/ASME Transactions on Mechatronics, vol. 27, no. 6, pp. 4798–4806, 2022. doi: 10.1109/TMECH.2022.3166977
    [101]
    Z. Ye and J. Yu, “Deep negative correlation multisource domains adaptation network for machinery fault diagnosis under different working conditions,” IEEE/ASME Transactions on Mechatronics, vol. 27, no. 6, pp. 5914–5925, 2022. doi: 10.1109/TMECH.2022.3191051
    [102]
    C. Zhao and W. Shen, “A domain generalization network combing invariance and specificity towards real-time intelligent fault diagnosis,” Mechanical Systems and Signal Processing, vol. 173, p. 108990, 2022. doi: 10.1016/j.ymssp.2022.108990
    [103]
    Y. Ma, J. Yang, and L. Li, “Gradient aligned domain generalization with a mutual teaching teacher-student network for intelligent fault diagnosis,” Reliability Engineering & System Safety, vol. 239, p. 109516, 2023.
    [104]
    J. Li, C. Shen, L. Kong, D. Wang, M. Xia, and Z. Zhu, “A new adversarial domain generalization network based on class boundary feature detection for bearing fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1–9, 2022.
    [105]
    C. Zhao and W. Shen, “Federated domain generalization: A secure and robust framework for intelligent fault diagnosis,” IEEE Transactions on Industrial Informatics, vol. 20, no. 2, pp. 2662–2670, 2024. doi: 10.1109/TII.2023.3296894
    [106]
    Y. Gao, J. Qi, Y. Sun, X. Hu, Z. Dong, and Y. Sun, “Industrial process fault diagnosis based on feature enhanced meta-learning toward domain generalization scenarios,” Knowledge-Based Systems, vol. 289, p. 111506, 2024. doi: 10.1016/j.knosys.2024.111506
    [107]
    L. Ren, T. Mo, and X. Cheng, “Meta-learning based domain generalization framework for fault diagnosis with gradient aligning and semantic matching,” IEEE Transactions on Industrial Informatics, vol. 20, no. 1, pp. 754–764, 2024. doi: 10.1109/TII.2023.3264111
    [108]
    Y. Shi, A. Deng, M. Deng, J. Li, M. Xu, S. Zhang, X. Ding, and S. Xu, “Domain transferability-based deep domain generalization method towards actual fault diagnosis scenarios,” IEEE Transactions on Industrial Informatics, vol. 19, no. 6, pp. 7355–7366, 2023. doi: 10.1109/TII.2022.3210555
    [109]
    S. Pang, “Stacked maximum independence autoencoders: A domain generalization approach for fault diagnosis under various working conditions,” Mechanical Systems and Signal Processing, vol. 208, p. 111035, 2024. doi: 10.1016/j.ymssp.2023.111035
    [110]
    H. Wang, X. Bai, S. Wang, J. Tan, and C. Liu, “Generalization on unseen domains via model-agnostic learning for intelligent fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1–11, 2022.
    [111]
    C. Zhao and W. Shen, “Imbalanced domain generalization via semantic-discriminative augmentation for intelligent fault diagnosis,” Advanced Engineering Informatics, vol. 59, p. 102262, 2024. doi: 10.1016/j.aei.2023.102262
    [112]
    B. Sch{ö}lkopf, F. Locatello, S. Bauer, N. R. Ke, N. Kalchbrenner, A. Goyal, and Y. Bengio, “Toward causal representation learning,” Proceedings of the IEEE, vol. 109, no. 5, pp. 612–634, 2021. doi: 10.1109/JPROC.2021.3058954
    [113]
    L. Jia, T. W. Chow, and Y. Yuan, “Causal disentanglement domain generalization for time-series signal fault diagnosis,” Neural Networks, vol. 172, p. 106099, 2024. doi: 10.1016/j.neunet.2024.106099
    [114]
    S. Jia, Y. Li, X. Wang, D. Sun, and Z. Deng, “Deep causal factorization network: A novel domain generalization method for cross-machine bearing fault diagnosis,” Mechanical Systems and Signal Processing, vol. 192, p. 110228, 2023. doi: 10.1016/j.ymssp.2023.110228
    [115]
    C. Guo, Z. Zhao, J. Ren, S. Wang, Y. Liu, and X. Chen, “Causal explaining guided domain generalization for rotating machinery intelligent fault diagnosis,” Expert Systems with Applications, vol. 243, p. 122806, 2024. doi: 10.1016/j.eswa.2023.122806
    [116]
    H. Ren, J. Wang, Z. Zhu, J. Shi, and W. Huang, “Domain fuzzy generalization networks for semi-supervised intelligent fault diagnosis under unseen working conditions,” Mechanical Systems and Signal Processing, vol. 200, p. 110579, 2023. doi: 10.1016/j.ymssp.2023.110579
    [117]
    B. Lu, Y. Zhang, Q. Sun, M. Li, and P. Li, “A novel multidomain contrastive-coding-based open-set domain generalization framework for machinery fault diagnosis,” IEEE Transactions on Industrial Informatics, vol. 10, pp. 1–13, 2024.
    [118]
    M. Ragab, Z. Chen, W. Zhang, E. Eldele, M. Wu, C.-K. Kwoh, and X. Li, “Conditional contrastive domain generalization for fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1–12, 2022.
    [119]
    C. Zhao, E. Zio, and W. Shen, “Multidomain class-imbalance generalization with fault relationship-induced augmentation for intelligent fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 73, pp. 1–11, 2024.
    [120]
    H. Zheng, Y. Yang, J. Yin, Y. Li, R. Wang, and M. Xu, “Deep domain generalization combining a priori diagnosis knowledge toward cross-domain fault diagnosis of rolling bearing,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–11, 2021.
    [121]
    Z. Fan, Q. Xu, C. Jiang, and S. X. Ding, “Deep mixed domain generalization network for intelligent fault diagnosis under unseen conditions,” IEEE Transactions on Industrial Electronics, vol. 71, no. 1, pp. 965–974, 2024. doi: 10.1109/TIE.2023.3243293
    [122]
    W. Zhang, C. Li, G. Peng, Y. Chen, and Z. Zhang, “A deep convolutional neural network with new training methods for bearing fault diagnosis under noisy environment and different working load,” Mechanical systems and signal processing, vol. 100, pp. 439–453, 2018. doi: 10.1016/j.ymssp.2017.06.022
    [123]
    H. Ren, J. Wang, W. Huang, X. Jiang, and Z. Zhu, “Domain-invariant feature fusion networks for semi-supervised generalization fault diagnosis,” Engineering Applications of Artificial Intelligence, vol. 126, p. 107117, 2023. doi: 10.1016/j.engappai.2023.107117
    [124]
    H. B. McMahan, E. Moore, D. Ramage, and B. A. y Arcas, “Federated learning of deep networks using model averaging,” arXiv preprint arXiv:1602.05629, vol. 2, p. 2, 2016.
    [125]
    Y. Song and P. Liu, “Federated domain generalization for intelligent fault diagnosis based on pseudo-siamese network and robust global model aggregation,” International Journal of Machine Learning and Cybernetics, vol. 15, no. 2, pp. 685–696, 2024. doi: 10.1007/s13042-023-01934-2
    [126]
    C. Zhao and W. Shen, “Mutual-assistance semisupervised domain generalization network for intelligent fault diagnosis under unseen working conditions,” Mechanical Systems and Signal Processing, vol. 189, p. 110074, 2023. doi: 10.1016/j.ymssp.2022.110074
    [127]
    J. Tian, Y. Jiang, J. Zhang, H. Luo, and S. Yin, “A novel data augmentation approach to fault diagnosis with class-imbalance problem,” Reliability Engineering & System Safety, vol. 243, p. 109832, 2024.
    [128]
    B. Lu, Z. Zhao, X. Gan, S. Liang, L. Fu, X. Wang, and C. Zhou, “Graph out-of-distribution generalization with controllable data augmentation,” IEEE Transactions on Knowledge and Data Engineering, pp. 1–14, 2024. doi: 10.1109/TKDE.2024.3393109
    [129]
    M. Wang, Y. Liu, J. Yuan, S. Wang, Z. Wang, and W. Wang, “Inter-class and inter-domain semantic augmentation for domain generalization,” IEEE Transactions on Image Processing, vol. 33, pp. 1338–1347, 2024. doi: 10.1109/TIP.2024.3354420
    [130]
    X. Luo, H. Wu, Z. Wang, J. Wang, and D. Meng, “A novel approach to large-scale dynamically weighted directed network representation,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 44, no. 12, pp. 9756–9773, 2022. doi: 10.1109/TPAMI.2021.3132503
    [131]
    Y. Yuan, X. Luo, M. Shang, and Z. Wang, “A kalman-filter-incorporated latent factor analysis model for temporally dynamic sparse data,” IEEE Transactions on Cybernetics, vol. 53, no. 9, pp. 5788–5801, 2023. doi: 10.1109/TCYB.2022.3185117
    [132]
    X. Jiang, X. Li, Q. Wang, Q. Song, J. Liu, and Z. Zhu, “Multi-sensor data fusion-enabled semi-supervised optimal temperature-guided pcl framework for machinery fault diagnosis,” Information Fusion, vol. 101, p. 102005, 2024. doi: 10.1016/j.inffus.2023.102005
    [133]
    Z. Xu, X. Chen, Y. Li, and J. Xu, “Hybrid multimodal feature fusion with multi-sensor for bearing fault diagnosis,” Sensors, vol. 24, no. 6, p. 1792, 2024. doi: 10.3390/s24061792
    [134]
    X. Wang, X. Liu, and Y. Li, “An incremental model transfer method for complex process fault diagnosis,” IEEE/CAA Journal of Automatica Sinica, vol. 6, no. 5, pp. 1268–1280, 2019. doi: 10.1109/JAS.2019.1911618
    [135]
    Y. Ge, F. Zhang, and Y. Ren, “Adaptive fault diagnosis method for rotating machinery with unknown faults under multiple working conditions,” Journal of Manufacturing Systems, vol. 63, pp. 177–184, 2022. doi: 10.1016/j.jmsy.2022.03.009
    [136]
    Z. Wang, J. Yang, and Y. Guo, “Unknown fault feature extraction of rolling bearings under variable speed conditions based on statistical complexity measures,” Mechanical Systems and Signal Processing, vol. 172, p. 108964, 2022. doi: 10.1016/j.ymssp.2022.108964
    [137]
    C. Wang, J. Nie, P. Yin, J. Xu, S. Yu, and X. Ding, “Unknown fault detection of rolling bearings guided by global-local feature coupling,” Mechanical Systems and Signal Processing, vol. 213, p. 111331, 2024. doi: 10.1016/j.ymssp.2024.111331
    • Related Articles
    • Supplements(0)

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(13)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (55) PDF downloads(11) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return