A journal of IEEE and CAA , publishes
high-quality papers in English on original
theoretical/experimental research
and development in all areas of automation
IEEE/CAA Journal of Automatica Sinica
| Citation: | Y. Zheng, H.-T. Zhang, Z. Yu, X. Huang, H. Jiao, and H. Ding, “Adaptive sliding mode control with linear extended state observer for active magnetic bearing-rotor systems,” IEEE/CAA J. Autom. Sinica, 2025. doi: 10.1109/JAS.2024.125037
|
| [1] |
H.-T. Zhang, Y. Wu, D. He, and H. Zhao, “Model predictive control to mitigate chatters in milling processes with input constraints,” Int. J. Mach. Tools Manuf., vol. 91, pp. 54–61, 2015. doi: 10.1016/j.ijmachtools.2015.01.002
|
| [2] |
E. H. Maslen and G. Schweitzer, Magnetic Bearings: Theory, Design, and Application to Rotating Machinery. Berlin, Germany: Springer, 2009.
|
| [3] |
A. Rojas-Moreno and C. Cuevas-Condor, “PD and PID control of a maglev system an experimental comparative study,” in Proc. IEEE 24th Int. Conf. Electron., Electr. Eng. Comput. (INTERCON), pp. 1–4, 2017.
|
| [4] |
G.-P. Ren, Z. Chen, H.-T. Zhang, Y. Wu, H. Meng, D. Wu, and H. Ding, “Design of interval type-2 fuzzy controllers for active magnetic bearing systems,” IEEE/ASME Trans. Mechatronics, vol. 25, no. 5, pp. 2449–2459, 2020. doi: 10.1109/TMECH.2020.2978018
|
| [5] |
A. Noshadi, J. Shi, W. S. Lee, P. Shi, and A. Kalam, “Robust control of an active magnetic bearing system using H∞ and disturbance observer-based control,” J. Vib. Control, vol. 23, no. 11, pp. 1857–1870, 2017. doi: 10.1177/1077546315602421
|
| [6] |
P. Cui, Q. Wang, S. Li, and Q. Gao, “Combined fir and fractional-order repetitive control for harmonic current suppression of magnetically suspended rotor system,” IEEE Trans. Ind. Electron., vol. 64, no. 6, pp. 4828–4835, 2017. doi: 10.1109/TIE.2017.2668985
|
| [7] |
V. I. Utkin, Sliding Modes in Control and Optimization. New York, USA: Springer, 2013.
|
| [8] |
J. Wang, L. Zhao, and L. Yu, “Adaptive terminal sliding mode control for magnetic levitation systems with enhanced disturbance compensation,” IEEE Trans. Ind. Electron., vol. 68, no. 1, pp. 756–766, 2021. doi: 10.1109/TIE.2020.2975487
|
| [9] |
C. Edwards and Y. B. Shtessel, “Adaptive continuous higher order sliding mode control,” Automatica, vol. 65, pp. 183–190, 2016. doi: 10.1016/j.automatica.2015.11.038
|
| [10] |
J. Han, “From PID to active disturbance rejection control,” IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 900–906, 2009. doi: 10.1109/TIE.2008.2011621
|
| [11] |
G.-P. Ren, H.-T. Zhang, Y. Wu, and H. Ding, “A general double-input synchronous signal processor for imbalanced vibration mitigation in AMB-rotor systems,” IEEE Trans. Syst. Man Cybern. Syst., vol. 53, no. 6, pp. 3823–3832, 2023. doi: 10.1109/TSMC.2022.3232517
|
| [12] |
Z. Gao et al., “Scaling and bandwidth-parameterization based controller tuning,” in Proc. Amer. Control Conf. (ACC), pp. 4989–4996, 2003.
|
| [13] |
A. K. Sanyal and J. Bohn, “Finite-time stabilisation of simple mechanical systems using continuous feedback,” Int. J. Control, vol. 88, no. 4, pp. 783–791, 2016.
|
Figures(4) / Tables(1)
DownLoad:
