Sliding Mode Control in Power Converters and Drives: A Review

Ligang Wu; Jianxing Liu; Sergio Vazquez; Sudip K. Mazumder

doi:10.1109/JAS.2021.1004380

Volume 9 Issue 3

Mar. 2022

IEEE/CAA Journal of Automatica Sinica

JCR Impact Factor: 15.3, Top 1 (SCI Q1)

CiteScore: 23.5, Top 2% (Q1)
Google Scholar h5-index: 77， TOP 5

Turn off MathJax

Article Contents

Article Navigation > IEEE/CAA Journal of Automatica Sinica > 2022 > 9(3): 392-406

L. G. Wu, J. Liu, S. Vazquez, and S. K. Mazumder, “Sliding mode control in power converters and drives: A review,” IEEE/CAA J. Autom. Sinica, vol. 9, no. 3, pp. 392–406, Mar. 2022. doi: 10.1109/JAS.2021.1004380

Citation:

L. G. Wu, J. Liu, S. Vazquez, and S. K. Mazumder, “Sliding mode control in power converters and drives: A review,” IEEE/CAA J. Autom. Sinica, vol. 9, no. 3, pp. 392–406, Mar. 2022. doi: 10.1109/JAS.2021.1004380

Citation:

PDF( 2012 KB)

Sliding Mode Control in Power Converters and Drives: A Review

doi: 10.1109/JAS.2021.1004380

1.
Department of Control Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
2.
Electronic Engineering Department, Universidad de Sevilla, 41092 Sevilla, Spain
3.
Electrical and Computer Engineering Department, University of Illinois Chicago, Chicago, IL 60607 USA

Funds: This work was supported in part by the National Key R&D Program of China (2019YFB1312000), the National Natural Science Foundation of China (62022030 and 62033005), the Fundamental Research Funds for the Central Universities (HIT.OCEF.2021005), the Heilongjiang Provincial Natural Science Foundation of China (62033005) and the Self-Planned Task of State Key Laboratory of Advanced Welding and Joining (HIT)

More Information

Author Bio:
Ligang Wu (Fellow, IEEE) received the B.S. degree in automation from the Harbin University of Science and Technology, Harbin, China, in 2001 and the M.E. degree in navigation guidance and control and the Ph.D. degree in control theory and control engineering from the Harbin Institute of Technology, Harbin, in 2003 and 2006, respectively. From January 2006 to April 2007, he was a Research Associate in the Department of Mechanical Engineering, The University of Hong Kong, Hong Kong, China. From September 2007 to June 2008, he was a Senior Research Associate in the Department of Mathematics, City University of Hong Kong, Hong Kong, China. From December 2012 to December 2013, he was a Research Associate in the Department of Electrical and Electronic Engineering, Imperial College London, London, UK. In 2008, he joined the Harbin Institute of Technology, China, as an Associate Professor, and was then promoted to a Full Professor in 2012. Prof. Wu was the winner of the National Science Fund for Distinguished Young Scholars in 2015, and received China Young Five Four Medal in 2016. He was named as the Distinguished Professor of Chang Jiang Scholar in 2017, and was named as the Highly Cited Researcher from 2015 to 2021.Prof. Wu currently serves as an Associate Editor for a number of journals, including IEEE Transactions on Automatic Control, IEEE Transactions on Industrial Electronics, IEEE/ASME Transactions on Mechatronics, Information Sciences, Signal Processing, and IET Control Theory and Applications. He is also an Associate Editor for the Conference Editorial Board, IEEE Control Systems Society. Prof. Wu has published 6 research monographs and more than 150 research papers in international referred journals. His current research interests include switched systems, stochastic systems, computational and intelligent systems, sliding mode control, and advanced control techniques for power electronic systems. In 2019, he was elevated to the IEEE Fellow grade for contributions to sliding mode control and robust filtering

Jianxing Liu (Senior Member, IEEE) received the B.S. degree in mechanical engineering and the M.E. degree in control science and engineering from the Harbin Institute of Technology, Harbin, China, in 2004 and 2010, respectively, and the Ph.D. degree in Automation from the Technical University of Belfort-Montbeliard, Belfort, France, in 2014. Dr. Liu is currently a Professor in the Department of Control Science and Engineering, Harbin Institute of Technology. His current research interests include nonlinear control and observation methods, control algorithms of power electronics systems and renewable energy systems. He is currently serving as Associate Editors for several journals, including IEEE/CAA Journal of Automatica Sinica, Nonlinear Dynamics, ISA Transactions and IEEE Journal of Emerging and Selected Topics in Industrial Electronics, etc

Sergio Vazquez (Fellow, IEEE) received the M.S. and Ph.D. degrees in industrial engineering from the University of Seville (US), Spain, in 2006, and 2010, respectively. Since 2002, he is with the Power Electronics Group working in R&D projects. He is an Associate Professor with the Department of Electronic Engineering, US. His research interests include power electronics systems, modeling, modulation and control of power electronics converters applied to renewable energy technologies. Dr. Vazquez was recipient as coauthor of the 2012 Best Paper Award of the IEEE Transactions on Industrial Electronics and 2015 Best Paper Award of the IEEE Industrial Electronics Magazine. He is involved in the Energy Storage Technical Committee of the IEEE industrial electronics society and is currently serving as an Associate Editor of the IEEE Transactions on Industrial Electronics

Sudip K. Mazumder (Fellow, IEEE) received the Ph.D. degree in electrical and computer engineering from Virginia Tech, Blacksburg, VA, USA, in 2001. He has been a Professor with the University of Illinois Chicago (UIC), Chicago, IL, USA, since 2001. He has been the President of Next Watt LLC, Hoffman Estates, IL, USA, since 2008. He has around 30 years of professional experience and has held research and development and design positions in leading industrial organizations and has served as a Technical Consultant for several industries. He has developed novel multi-scale methodologies for controlling power-electronic systems and networks at wide-narrow-bandgap semiconductor device level resulting in a plurality of practical applications. He has also made multiple novel contributions to the areas of high-frequency-link power electronics including hybrid modulation and differential-mode-converter topology and optically controlled power semiconductor devices and power electronics. He has published more than 250 refereed papers, delivered over 110 keynote/plenary/distinguished/invited presentations, and received 55 sponsored research studies since joining UIC. He served as a Distinguished Lecturer for the IEEE Power Electronics Society (2016-2019) and since 2021, he has been serving as a Regional Distinguished Lecturer for the IEEE Power Electronics Society for the US region. He is the current Editor-at-Large for IEEE Transactions on Power Electronics, the leading journal in power electronics. He serves as an Administrative Committee Member and a Member at Large for the IEEE Power Electronics Society since 2015 and 2020, respectively. He also served as a Chair for The 2021 IEEE 12th International Symposium on Power Electronics for Distributed Generation Systems (PEDG 2021) and as a Chair for the IEEE Power Electronics Society’s Technical Committee on Sustainable Energy Systems between 2015-2020. At UIC, he is the recipient of the most prestigious awards including Distinguished Researcher Award in Natural Sciences and Engineering (2020), Inventor of the Year Award (2014), and University Scholar Award (2013). Earlier, he received several IEEE awards including Prize Paper Award from the IEEE Transactions on Power and Electronics and IEEE International Future Energy Challenge Award, the U.S. Office of Naval Research (ONR) Young Investigator Award (2005) and the U.S. National Science Foundation (NSF) CAREER Award (2003). He was a National Merit scholar in India in 1983 for ranking 9th out of about 250,000 students
Corresponding author: Jianxing Liu, e-mail: jx.liu@hit.edu.cn
Received Date: 2021-07-26
Revised Date: 2021-11-14
Accepted Date: 2021-11-18

Available Online: 2021-11-25

Abstract

Abstract

Sliding mode control (SMC) has been studied since the 1950s and widely used in practical applications due to its insensitivity to matched disturbances. The aim of this paper is to present a review of SMC describing the key developments and examining the new trends and challenges for its application to power electronic systems. The fundamental theory of SMC is briefly reviewed and the key technical problems associated with the implementation of SMC to power converters and drives, such chattering phenomenon and variable switching frequency, are discussed and analyzed. The recent developments in SMC systems, future challenges and perspectives of SMC for power converters are discussed.
- Motor drive,
- power electronics systems,
- sliding mode control

FullText(HTML)

References(108)

References

[1]	E. Shigin, “On improvement of transient processes with the help of correction networks with varying parameters,” Automat. Remote Contr., no. 4, pp. 299–304, 1958.
[2]	S. Emelyanov, “The use of nonlinear corrective devices of the key type to improve the behavior of second order control systems,” Automatic Remote Control, vol. 7, pp. 844–859, 1959.
[3]	U. Itkis, Control Systems of Variable Structure. New York: Wiley, 1976.
[4]	V. Utkin, “Variable structure systems with sliding modes,” IEEE Trans. Automatic Control, vol. 22, no. 2, pp. 212–222, 1977. doi: 10.1109/TAC.1977.1101446
[5]	C.-C. Wen and C.-C. Cheng, “Design of sliding surface for mismatched uncertain systems to achieve asymptotical stability,” Journal of the Franklin Institute, vol. 345, no. 8, pp. 926–941, 2008. doi: 10.1016/j.jfranklin.2008.06.003
[6]	H. H. Choi, “LMI-based sliding surface design for integral sliding mode control of mismatched uncertain systems,” IEEE Trans. Automatic Control, vol. 52, no. 4, pp. 736–742, 2007. doi: 10.1109/TAC.2007.894543
[7]	J. Yang, S. Li, and X. Yu, “Sliding-mode control for systems with mismatched uncertainties via a disturbance observer,” IEEE Trans. Industrial Electronics, vol. 60, no. 1, pp. 160–169, 2012.
[8]	W.-J. Cao and J.-X. Xu, “Nonlinear integral-type sliding surface for both matched and unmatched uncertain systems,” IEEE Trans. Automatic Control, vol. 49, no. 8, pp. 1355–1360, 2004. doi: 10.1109/TAC.2004.832658
[9]	Y. Jiang, D. Clements, and T. Hesketh, “Rejection of unmatched disturbances in sliding mode control,” IFAC Proceedings Volumes, vol. 29, no. 1, pp. 3473–3477, 1996. doi: 10.1016/S1474-6670(17)58215-4
[10]	V. Utkin, J. Gulder, and J. Shi, Sliding Mode Control in Electromechanical Systems. Taylor & Francis Group, 2009.
[11]	X. Yu and O. Kaynak, “Sliding-mode control with soft computing: A survey,” IEEE Trans. Industrial Electronics, vol. 56, no. 9, pp. 3275–3285, 2009. doi: 10.1109/TIE.2009.2027531
[12]	A. Sabanovic, L. M. Fridman, and S. K. Spurgeon, Variable Structure Systems: From Principles to Implementation. IET, 2004, vol. 66.
[13]	O. Kaynak, K. Erbatur, and M. Ertugnrl, “The fusion of computationally intelligent methodologies and sliding-mode control-a survey,” IEEE Trans. Industrial Electronics, vol. 48, no. 1, pp. 4–17, 2001. doi: 10.1109/41.904539
[14]	V. M. Panchade, R. H. Chile, and B. M. Patre, “A survey on sliding mode control strategies for induction motors,” Annual Reviews in Control, vol. 37, no. 2, pp. 289–307, 2013. doi: 10.1016/j.arcontrol.2013.09.008
[15]	D. A. Haghighi and S. Mobayen, “Design of an adaptive super-twisting decoupled terminal sliding mode control scheme for a class of fourth-order systems,” ISA Transactions, vol. 75, pp. 216–225, 2018. doi: 10.1016/j.isatra.2018.02.006
[16]	G. Bartolini, A. Pisano, E. Punta, and E. Usai, “A survey of applications of second-order sliding mode control to mechanical systems,” Int. Journal of Control, vol. 76, no. 9-10, pp. 875–892, 2003. doi: 10.1080/0020717031000099010
[17]	Y. Shtessel, C. Edwards, L. Fridman, A. Levant et al., Sliding Mode Control and Observation. Springer, 2014, vol. 10.
[18]	L. Wu, P. Shi, and X. Su, Sliding Mode Control of Uncertain Parameterswitching Hybrid Systems. John Wiley & Sons, 2014.
[19]	X. Xi, S. Mobayen, H. Ren, and S. Jafari, “Robust finite-time synchronization of a class of chaotic systems via adaptive global sliding mode control,” Journal of Vibration and Control, vol. 24, no. 17, pp. 3842–3854, 2018. doi: 10.1177/1077546317713532
[20]	S. Mobayen and F. Tchier, “Nonsingular fast terminal sliding-mode stabilizer for a class of uncertain nonlinear systems based on disturbance observer,” Scientia Iranica, vol. 24, no. 3, pp. 1410–1418, 2017. doi: 10.24200/sci.2017.4123
[21]	S.-C. Tan, Y.-M. Lai, and C.-K. Tse, Sliding Mode Control of Switching Power Converters: Techniques and Implementation. CRC Press, 2011.
[22]	J. Holtz and X. Qi, “Optimal control of medium-voltage drives – An overview,” IEEE Trans. Industrial Electronics, vol. 60, no. 12, pp. 5472–5481, 2013. doi: 10.1109/TIE.2012.2230594
[23]	Y. Sun, Y. Wang, Z. Wei, G. Sun, and X. Wu, “Robust H_∞ load frequency control of multi-area power system with time delay: A sliding mode control approach,” IEEE/CAA Journal of Automatica Sinica, vol. 5, no. 2, pp. 610–617, 2018. doi: 10.1109/JAS.2017.7510649
[24]	G. S. Buja and M. P. Kazmierkowski, “Direct torque control of PWM inverter-fed AC motors-a survey,” IEEE Trans. Industrial Electronics, vol. 51, no. 4, pp. 744–757, 2004. doi: 10.1109/TIE.2004.831717
[25]	J. I. Leon, S. Vazquez, and L. G. Franquelo, “Multilevel converters: Control and modulation techniques for their operation and industrial applications,” Proc. the IEEE, vol. 105, no. 11, pp. 2066–2081, Nov. 2017. doi: 10.1109/JPROC.2017.2726583
[26]	X. Yu and O. Kaynak, “Sliding mode control made smarter: A computational intelligence perspective,” IEEE Systems,Man,and Cybernetics Magazine, vol. 3, no. 2, pp. 31–34, 2017. doi: 10.1109/MSMC.2017.2663559
[27]	C. M. Martínez and D. Cao, “Integrated energy management for electrified vehicles,” Ihorizon-Enabled Energy Management for Electrified Vehicles, pp. 15–75, 2019.
[28]	A. Djoudi, H. Chekireb, S. Bacha, et al, “Low-cost sliding mode control of WECS based on DFIG with stability analysis,” Turkish Journal of Electrical Engineering &Computer Sciences, vol. 23, no. 6, pp. 1698–1714, 2015.
[29]	V. Pande, U. Mate, and S. Kurode, “Discrete sliding mode control strategy for direct real and reactive power regulation of wind driven DFIG,” Electric Power Systems Research, vol. 100, pp. 73–81, 2013. doi: 10.1016/j.jpgr.2013.03.001
[30]	C. Edwards and S. Spurgeon, Sliding Mode Control: Theory and Applications. CRC Press, 1998.
[31]	H. Lee and V. I. Utkin, “Chattering suppression methods in sliding mode control systems,” Annual Reviews in Control, vol. 31, no. 2, pp. 179–188, 2007. doi: 10.1016/j.arcontrol.2007.08.001
[32]	I. Boiko and L. Fridman, “Analysis of chattering in continuous sliding-mode controllers,” IEEE Trans. Automatic Control, vol. 50, no. 9, pp. 1442–1446, 2005. doi: 10.1109/TAC.2005.854655
[33]	Y. Feng, F. Han, and X. Yu, “Chattering free full-order sliding-mode control,” Automatica, vol. 50, no. 4, pp. 1310–1314, 2014. doi: 10.1016/j.automatica.2014.01.004
[34]	P. V. Suryawanshi, P. D. Shendge, and S. B. Phadke, “A boundary layer sliding mode control design for chatter reduction using uncertainty and disturbance estimator,” Int. Journal of Dynamics and Control, vol. 4, no. 4, pp. 456–465, 2016. doi: 10.1007/s40435-015-0150-9
[35]	S. Chakrabarty and B. Bandyopadhyay, “A generalized reaching law for discrete time sliding mode control,” Automatica, vol. 52, pp. 83–86, 2015. doi: 10.1016/j.automatica.2014.10.124
[36]	S. Wen, M. Z. Chen, Z. Zeng, X. Yu, and T. Huang, “Fuzzy control for uncertain vehicle active suspension systems via dynamic sliding-mode approach,” IEEE Trans. Systems,Man,and Cybernetics:Systems, vol. 47, no. 1, pp. 24–32, 2017. doi: 10.1109/TSMC.2016.2564930
[37]	N. Bouarroudj, D. Boukhetala, and F. Boudjema, “Sliding-mode controller based on fractional order calculus for a class of nonlinear systems,” Int. Journal of Electrical &Computer Engineering, vol. 6, no. 5, pp. 2239–2250, 2016.
[38]	J. J. Slotine and S. S. Sastry, “Tracking control of nonlinear systems using sliding surface with application to robot manipulator,” Int. Journal of Control, vol. 38, no. 2, pp. 931–938, 1983.
[39]	W. Gao, Y. Wang, and A. Homaifa, “Discrete-time variable structure control systems,” IEEE Transactions on Industrial Electronics, vol. 42, no. 2, pp. 117–122, 1995. doi: 10.1109/41.370376
[40]	G. Bartolini, A. Ferrara, and E. Usai, “Chattering avoidance by second-order sliding mode control,” IEEE Trans. Automatic Control, vol. 43, no. 2, pp. 241–246, 1998. doi: 10.1109/9.661074
[41]	L. Wong, F. Leung, and P. Tam, “A chattering elimination algorithm for sliding mode control of uncertain non-linear systems,” Mechatronics, vol. 8, no. 7, pp. 765–775, 1998. doi: 10.1016/S0957-4158(98)00031-2
[42]	A. Levant, “Sliding order and sliding accuracy in sliding mode control,” Int. Journal of Control, vol. 58, no. 6, pp. 1247–1263, 1993. doi: 10.1080/00207179308923053
[43]	G. Bartolini, A. Ferrara, and E. Usai, “Chattering avoidance by second-order sliding mode control,” IEEE Trans. Automatic Control, vol. 43, no. 2, pp. 241–246, 1998. doi: 10.1109/9.661074
[44]	G. Bartolini, A. Pisano, and E. Usai, “Second-order sliding-mode control of container cranes,” Automatica, vol. 38, no. 10, pp. 1783–1790, 2002. doi: 10.1016/S0005-1098(02)00081-X
[45]	S. Laghrouche, F. Plestan, and A. Glumineau, “Higher order sliding mode control based on integral sliding mode,” Automatica, vol. 43, no. 3, pp. 531–537, 2007. doi: 10.1016/j.automatica.2006.09.017
[46]	A. Levant, “Principles of 2-sliding mode design,” Automatica, vol. 43, no. 4, pp. 576–586, 2007. doi: 10.1016/j.automatica.2006.10.008
[47]	R.-J. Lian, “Adaptive self-organizing fuzzy sliding-mode radial basis-function neural-network controller for robotic systems,” IEEE Trans. Industrial Electronics, vol. 61, no. 3, pp. 1493–1503, 2014. doi: 10.1109/TIE.2013.2258299
[48]	J. Yu, J. Liu, Z. Wu, and H. Fang, “Depth control of a bioinspired robotic dolphin based on sliding-mode fuzzy control method,” IEEE Trans. Industrial Electronics, vol. 65, no. 3, pp. 2429–2438, 2018. doi: 10.1109/TIE.2017.2745451
[49]	D. Qian and G. Fan, “Neural-network-based terminal sliding mode control for frequency stabilization of renewable power systems,” IEEE/CAA Journal of Automatica Sinica, vol. 5, no. 3, pp. 706–717, 2018. doi: 10.1109/JAS.2018.7511078
[50]	S.-C. Tan, Y. Lai, C. K. Tse, and M. K. Cheung, “Adaptive feedforward and feedback control schemes for sliding mode controlled power converters,” IEEE Trans. Power Electronics, vol. 21, no. 1, pp. 182–192, 2006. doi: 10.1109/TPEL.2005.861191
[51]	Y. Yin, J. Liu, S. Vazquez, L. Wu, and L. G. Franquelo, “Disturbance observer based second order sliding mode control for dc-dc buck converters,” in Proc. IECON 2017-Conf. of the IEEE Industrial Electronics Society, 2017, pp. 7117–7122.
[52]	L. Malesani, R. G. Spiazzi, and P. Tenti, “Performance optimization of cuk converters by sliding-mode control,” IEEE Trans. Power Electronics, vol. 10, no. 3, pp. 302–309, May 1995. doi: 10.1109/63.387995
[53]	S. K. Mazumder, A. H. Nayfeh, and A. Borojevic, “Robust control of parallel dc-dc buck converters by combining integral-variable-structure and multiple-sliding-surface control schemes,” IEEE Trans. Power Electronics, vol. 17, no. 3, pp. 428–437, May 2002. doi: 10.1109/TPEL.2002.1004251
[54]	A. Mehta and B. Naik, Sliding Mode Controllers for Power Electronic Converters. Springer, 2019.
[55]	V. M. Nguyen and C. Lee, “Indirect implementations of sliding-mode control law in buck-type converters,” in Proceedings Applied Power Electronics Conf. and Exposition (APEC), vol. 1. IEEE, 1996, pp. 111–115.
[56]	S. K. Mazumder and S. L. Kamisetty, “Design and experimental validation of a multiphase VRM controller,” IEE Proceedings - Electric Power Applications, vol. 152, no. 5, pp. 1076–1084, 2005. doi: 10.1049/ip-epa:20045165
[57]	S.-C. Tan, Y.-M. Lai, and C. K. Tse, “A unified approach to the design of pwm-based sliding-mode voltage controllers for basic dc-dc converters in continuous conduction mode,” IEEE Trans. Circuits and Systems I:Regular Papers, vol. 53, no. 8, pp. 1816–1827, 2006. doi: 10.1109/TCSI.2006.879052
[58]	S. C. Tan, Y. M. Lai, C. K. Tse, L. Martinez-Salamero, and C. K. Wu, “A fast-response sliding-mode controller for boost-type converters with a wide range of operating conditions,” IEEE Trans. Industrial Electronics, vol. 54, no. 6, pp. 3276–3286, Dec. 2007. doi: 10.1109/TIE.2007.905969
[59]	S. Kouro, J. I. Leon, D. Vinnikov, and L. G. Franquelo, “Grid-connected photovoltaic systems: An overview of recent research and emerging PV converter technology,” IEEE Industrial Electronics Magazine, vol. 9, no. 1, pp. 47–61, Mar. 2015. doi: 10.1109/MIE.2014.2376976
[60]	Y. Yin, S. Vazquez, A. Marquez, J. Liu, J. I. Leon, L. Wu, and L. G. Franquelo, “Observer-based sliding-mode control for grid-connected power converters under unbalanced grid conditions,” IEEE Trans. Industrial Electronics, vol. 69, no. 1, pp. 517–527, 2022. doi: 10.1109/TIE.2021.3050387
[61]	R. Wang, Q. Sun, D. Ma, and Z. Liu, “The small-signal stability analysis of the droop-controlled converter in electromagnetic timescale,” IEEE Trans. Sustainable Energy, vol. 10, no. 3, pp. 1459–1469, 2019. doi: 10.1109/TSTE.2019.2894633
[62]	W. Hu, C. Ruan, H. Nian, and D. Sun, “Zero-sequence current suppression strategy with common mode voltage control for open-end winding PMSM drives with common DC bus,” IEEE Trans. Industrial Electronics, DOI: 10.1109/TIE.2020.2988221.
[63]	Q. Sun, R. Han, H. Zhang, J. Zhou, and J. M. Guerrero, “A multiagent-based consensus algorithm for distributed coordinated control of distributed generators in the energy internet,” IEEE Trans. Smart Grid, vol. 6, no. 6, pp. 3006–3019, 2015. doi: 10.1109/TSG.2015.2412779
[64]	S. Vazquez, A. Marquez, R. Aguilera, D. Quevedo, J. I. Leon, and L. G. Franquelo, “Predictive optimal switching sequence direct power control for grid-connected power converters,” IEEE Trans. Industrial Electronics, vol. 62, no. 4, pp. 2010–2020, Apr. 2015. doi: 10.1109/TIE.2014.2351378
[65]	J. Silva, “Sliding mode control of boost-type unity-power-factor PWM rectifiers,” IEEE Trans. Industrial Electronics, vol. 46, no. 3, pp. 594–603, 1999. doi: 10.1109/41.767067
[66]	J. Liu, S. Vazquez, L. Wu, A. Marquez, H. Gao, and L. G. Franquelo, “Extended state observer-based sliding-mode control for three-phase power converters,” IEEE Trans. Industrial Electronics, vol. 64, no. 1, pp. 22–31, 2017. doi: 10.1109/TIE.2016.2610400
[67]	Y. Yin, W. Luo, J. Liu, S. Vazquez, L. Wu, and L. G. Franquelo, “Sliding mode control of three-phase power converters with disturbance attenuation performance,” in Proc. 11th IEEE Int. Conf. on Compatibility, Power Electronics and Power Engineering (CPEPOWERENG). IEEE, 2017, pp. 270–275.
[68]	Y. Yin, J. Liu, J. A. Sanchez, L. Wu, S. Vazquez, J. I. Leon, and L. G. Franquelo, “Observer-based adaptive sliding mode control of NPC converters: an RBF neural network approach,” IEEE Trans. Power Electronics, DOI: 10.1109/TPEL.2018.2853093.
[69]	J. Hu, L. Shang, Y. He, and Z. Zhu, “Direct active and reactive power regulation of grid-connected DC/AC converters using sliding mode control approach,” IEEE Trans. Power Electronics, vol. 26, no. 1, pp. 210–222, 2011. doi: 10.1109/TPEL.2010.2057518
[70]	S. Vazquez, J. I. Leon, L. G. Franquelo, J. Rodriguez, H. A. Young, A. Marquez, and P. Zanchetta, “Model predictive control: A review of its applications in power electronics,” IEEE Industrial Electronics Magazine, vol. 8, no. 1, pp. 16–31, 2014. doi: 10.1109/MIE.2013.2290138
[71]	M. P. Kazmierkowski and L. Malesani, “Current control techniques for three-phase voltage-source PWM converters: a survey,” IEEE Trans. Industrial Electronics, vol. 45, no. 5, pp. 691–703, Oct. 1998. doi: 10.1109/41.720325
[72]	S. Vazquez, J. A. Sanchez, J. M. Carrasco, J. I. Leon, and E. Galvan, “A model-based direct power control for three-phase power converters,” IEEE Trans. Industrial Electronics, vol. 55, no. 4, pp. 1647–1657, Apr. 2008. doi: 10.1109/TIE.2008.917113
[73]	M. Malinowski, M. Jasiński, and M. P. Kazmierkowski, “Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM),” IEEE Trans. Industrial Electronics, vol. 51, no. 2, pp. 447–454, 2004. doi: 10.1109/TIE.2004.825278
[74]	S. Bacha, I. Munteanu, A. I. Bratcu, et al, “Power electronic converters modeling and control,” Advanced Textbooks in Control and Signal Processing, vol. 454, Article No. 454, 2014.
[75]	D. M. Vilathgamuwa, S. R. Wall, and R. D. Jackson, “Variable structure control of voltage sourced reversible rectifiers,” IEE Proceedings - Electric Power Applications, vol. 143, no. 1, pp. 18–24, Jan. 1996. doi: 10.1049/ip-epa:19960039
[76]	V. F. Pires and J. F. Silva, “Three-phase single-stage four-switch PFC buck-boost-type rectifier,” IEEE Trans. Industrial Electronics, vol. 52, no. 2, pp. 444–453, Apr. 2005. doi: 10.1109/TIE.2005.843911
[77]	S. K. Mazumder, “A novel discrete control strategy for independent stabilization of parallel three-phase boost converters by combining space-vector modulation with variable-structure control,” IEEE Trans. Power Electronics, vol. 18, no. 4, pp. 1070–1083, Jul. 2003. doi: 10.1109/TPEL.2003.813770
[78]	K. Xing, F. C. Lee, D. Borojevic, Z. Ye, and S. Mazumder, “Interleaved PWM with discontinuous space-vector modulation,” IEEE Trans. Power Electronics, vol. 14, no. 5, pp. 906–917, Sep. 1999. doi: 10.1109/63.788496
[79]	S. K. Mazumder, “Continuous and discrete variable-structure controls for parallel three-phase boost rectifier,” IEEE Trans. Industrial Electronics, vol. 52, no. 2, pp. 340–354, Apr. 2005. doi: 10.1109/TIE.2005.843921
[80]	C.-T. Pan and T.-C. Chen, “Modelling and analysis of a three phase PWM ac-dc convertor without current sensor,” IEE Proceedings B Electric Power Applications, vol. 140, no. 3, pp. 201–208, 1993. doi: 10.1049/ip-b.1993.0024
[81]	W.-C. Lee, T.-K. Lee, and D.-S. Hyun, “Comparison of single-sensor current control in the dc link for three-phase voltage-source PWM converters,” IEEE Trans. Industrial Electronics, vol. 48, no. 3, pp. 491–505, 2001. doi: 10.1109/41.925576
[82]	D.-C. Lee and D.-S. Lim, “AC voltage and current sensorless control of three-phase pwm rectifiers,” IEEE Trans. Power Electronics, vol. 17, no. 6, pp. 883–890, 2002. doi: 10.1109/TPEL.2002.805592
[83]	S. Vazquez, J. Rodriguez, M. Rivera, L. G. Franquelo, and M. Norambuena, “Model predictive control for power converters and drives: Advances and trends,” IEEE Trans. Industrial Electronics, vol. 64, no. 2, pp. 935–947, 2017. doi: 10.1109/TIE.2016.2625238
[84]	S. Vazquez, R. P. Aguilera, P. Acuna, J. Pou, J. I. Leon, L. G. Franquelo, and V. G. Agelidis, “Model predictive control for single-phase npc converters based on optimal switching sequences,” IEEE Trans. Industrial Electronics, vol. 63, no. 12, pp. 7533–7541, 2016. doi: 10.1109/TIE.2016.2594227
[85]	H. H. Choi, N. T.-T. Vu, and J.-W. Jung, “Digital implementation of an adaptive speed regulator for a PMSM,” IEEE Trans. Power Electronics, vol. 26, no. 1, pp. 3–8, 2011. doi: 10.1109/TPEL.2010.2055890
[86]	S. Li and Z. Liu, “Adaptive speed control for permanent-magnet synchronous motor system with variations of load inertia,” IEEE Trans. Industrial Electronics, vol. 56, no. 8, pp. 3050–3059, 2009. doi: 10.1109/TIE.2009.2024655
[87]	C.-S. Chen, “TSK-type self-organizing recurrent-neural-fuzzy control of linear microstepping motor drives,” IEEE Trans. Power Electronics, vol. 25, no. 9, pp. 2253–2265, 2010. doi: 10.1109/TPEL.2010.2046648
[88]	T. Bernardes, V. F. Montagner, H. A. Gründling, and H. Pinheiro, “Discrete-time sliding mode observer for sensorless vector control of permanent magnet synchronous machine,” IEEE Trans. Industrial Electronics, vol. 61, no. 4, pp. 1679–1691, 2014. doi: 10.1109/TIE.2013.2267700
[89]	C. L. Baratieri and H. Pinheiro, “New variable gain super-twisting sliding mode observer for sensorless vector control of nonsinusoidal back-EMF PMSM,” Control Engineering Practice, vol. 52, pp. 59–69, 2016. doi: 10.1016/j.conengprac.2016.04.003
[90]	S. E. Ryvkin and E. P. Lever, Sliding Mode Control for Synchronous Electric Drives. CRC Press, 2011.
[91]	F. Mohd Zaihidee, S. Mekhilef, and M. Mubin, “Robust speed control of PMSM using sliding mode control (SMC)-a review,” Energies, vol. 12, no. 9, Article No. 1669, 2019. doi: 10.3390/en12091669
[92]	W. Xu, A. K. Junejo, Y. Liu, and M. R. Islam, “Improved continuous fast terminal sliding mode control with extended state observer for speed regulation of PMSM drive system,” IEEE Trans. Vehicular Technology, vol. 68, no. 11, pp. 10465–10476, 2019. doi: 10.1109/TVT.2019.2926316
[93]	A. K. Junejo, W. Xu, C. Mu, M. M. Ismail, and Y. Liu, “Adaptive speed control of PMSM drive system based a new sliding-mode reaching law,” IEEE Trans. Power Electronics, vol. 35, no. 11, pp. 12110–12121, 2020. doi: 10.1109/TPEL.2020.2986893
[94]	X. Zhang, L. Sun, K. Zhao, and L. Sun, “Nonlinear speed control for pmsm system using sliding-mode control and disturbance compensation techniques,” IEEE Trans. Power Electronics, vol. 28, no. 3, pp. 1358–1365, 2013. doi: 10.1109/TPEL.2012.2206610
[95]	F.-J. Lin and S.-L. Chiu, “Adaptive fuzzy sliding-mode control for PM synchronous servo motor drives,” IEE Proceedings-Control Theory and Applications, vol. 145, no. 1, pp. 63–72, 1998. doi: 10.1049/ip-cta:19981683
[96]	C. Lascu, I. Boldea, and F. Blaabjerg, “Variable-structure direct torque control-a class of fast and robust controllers for induction machine drives,” IEEE Trans. Industrial Electronics, vol. 51, no. 4, pp. 785–792, 2004. doi: 10.1109/TIE.2004.831724
[97]	C. Lascu, I. Boldea, and F. Blaabjer, “Super-twisting sliding mode control of torque and flux in permanent magnet synchronous machine drives,” in Proc. IECON 39th Annual Conf. of the IEEE Industrial Electronics Society, Nov 2013, pp. 3171–3176.
[98]	M. P. Kazmierkowski, L. G. Franquelo, J. Rodriguez, M. A. Perez, and J. I. Leon, “High-performance motor drives,” IEEE Industrial Electronics Magazine, vol. 5, no. 3, pp. 6–26, Sept. 2011. doi: 10.1109/MIE.2011.942173
[99]	E. Zerdali and M. Barut, “The comparisons of optimized extended kalman filters for speed-sensorless control of induction motors,” IEEE Trans. Industrial Electronics, vol. 64, no. 6, pp. 4340–4351, 2017. doi: 10.1109/TIE.2017.2674579
[100]	G. Yang and T.-H. Chin, “Adaptive-speed identification scheme for a vector-controlled speed sensorless inverter-induction motor drive,” IEEE Trans. Industry Applications, vol. 29, no. 4, pp. 820–825, 1993. doi: 10.1109/28.232001
[101]	S. Chi, Z. Zhang, and L. Xu, “Sliding-mode sensorless control of directdrive PM synchronous motors for washing machine applications,” IEEE Trans. Industry Applications, vol. 45, no. 2, pp. 582–590, 2009. doi: 10.1109/TIA.2009.2013545
[102]	F. Nollet, T. Floquet, and W. Perruquetti, “Observer-based second order sliding mode control laws for stepper motors,” Control Engineering Practice, vol. 16, no. 4, pp. 429–443, 2008. doi: 10.1016/j.conengprac.2007.05.008
[103]	Y. Shtessel, S. Baev, and H. Biglari, “Unity power factor control in three-phase AC/DC boost converter using sliding modes,” IEEE Trans. Industrial Electronics, vol. 55, no. 11, pp. 3874–3882, 2008. doi: 10.1109/TIE.2008.2003203
[104]	M. Hamida, J. De Leon, A. Glumineau, and R. Boisliveau, “An adaptive interconnected observer for sensorless control of PM synchronous motors with online parameter identification,” IEEE Trans. Industrial Electronics, vol. 60, no. 2, pp. 739–748, 2013. doi: 10.1109/TIE.2012.2206355
[105]	G. Wang, T. Li, G. Zhang, X. Gui, and D. Xu, “Position estimation error reduction using recursive-least-square adaptive filter for model-based sensorless interior permanent-magnet synchronous motor drives,” IEEE Trans. Industrial Electronics, vol. 61, no. 9, pp. 5115–5125, 2014. doi: 10.1109/TIE.2013.2264791
[106]	M. Comanescu and L. Xu, “Sliding-mode MRAS speed estimators for sensorless vector control of induction machine,” IEEE Trans. Industrial Electronics, vol. 53, no. 1, pp. 146–153, 2006. doi: 10.1109/TIE.2005.862303
[107]	J. Li, L. Xu, and Z. Zhang, “An adaptive sliding-mode observer for induction motor sensorless speed control,” IEEE Trans. Industry Applications, vol. 41, no. 4, pp. 1039–1046, 2005. doi: 10.1109/TIA.2005.851585
[108]	G. Wang, M. Valla, and J. Solsona, “Position sensorless permanent magnet synchronous machine drives-a review,” IEEE Trans. Industrial Electronics, vol. 67, no. 7, pp. 5830–5842, 2019.

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(5) / Tables(7)

Get Citation

PDF

XML

Article Metrics

Article views (1817) PDF downloads(381)

Sliding Mode Control in Power Converters and Drives: A Review

doi: 10.1109/JAS.2021.1004380

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Export File

Citation

Format

Content